itc LED Video Wall Supplier > News > LED Knowledge > How to avoid water leakage when installing LED screen outdoor?

How to avoid water leakage when installing LED screen outdoor?

2022-02-15 1,204

If the LED display is used outdoors, it will face many challenges. The LED display screen will be affected by high temperature, cold waves, strong wind, rain and other bad weather. If these aspects are not done well, the safe operation of the display will be impossible. Today, I want to tell you how to install LED display to avoid water leakage.

Add sealant to the backplate

In order to save trouble, many friends do not add backplane or sealant when installing outdoor LED screens. After a long time, the components will certainly be flooded, and the LED display will have problems over time. I'm afraid of water. Once water enters the line, it will cause the line to burn down. These problems that can be easily solved cannot be ignored.

Leakage opening

If the LED display screen is closely combined with the backplane, a drain must be made under it; The so-called water leakage port is used to leak water. No matter how close the front and back of the LED display screen are combined, there is more or less water in it over the years. If there is no leakage hole at the lower opening, the water will accumulate more and more over time. If a leak hole is made, the water will flow away, which can play a good waterproof role and prolong the service life of the LED screens.

Suitable line

When installing LED display screen, appropriate wires must be selected for plug wiring, which generally follows the principle of "rather large than small", that is, calculate the total wattage of LED display screen, select slightly larger wires, and do not select appropriate or too small wires, which is easy to burn the wires and affect the safe operation of LED display screen.

Relevant news

Relevant Products